![]() It will turn over or “crank over” but will never actually run. Without spark to ignite the fuel mix in the combustion chamber, the engine will not start. If it’s not a fuel problem, the electrical spark isn’t getting through to the spark plugs. Start with the fuel injectors, and make sure they are clean. Some of those options are a stretch, but do have an effect on the system. This could be caused by a few different parts including the fuel pump, fuel filter, fuel injectors, and fuel lines. Again, this will be a case where the engine cranks over, but will not actually run. If the wrong amount of fuel is being injected into the combustion chamber, or being injected at the wrong time, the engine will not start. You may be out of fuel, or the fuel isn’t getting to your engine. Just remember: a vehicle will always require air, fuel, and the ignition to operate.Ĭheck the fuel. There are many possible causes, but we know it is neither a battery nor a starter problem. The 2014 Chevrolet Trax engine cranks over but won’t start: Replace starter solenoid, starter contacts, starter assembly or repair starter circuit as required. ![]() The solenoid attached to the top of the starter can fail, as well as the components inside. If they look really corroded, you need to clean the battery posts and cable connectors or replace the cables and try to start the engine. Very often this could be caused by a low battery or poor connection between the battery and starter.Ĭheck the battery and the terminal cable connections. If you turn the key to the “Start” position, but the engine won’t crank all you hear is a single click or repeated clicking coming from the engine compartment. The 2014 Chevrolet Trax car makes a clicking noise but won’t start: Most commonly this could be caused by a low/dead battery or there is no connection between the battery and starter.Ĭheck the battery and the terminal cable connections. If nothing happens when you turn the ignition key to the “Start” position, it means that the starter motor doesn’t turn over the engine. 2014 Chevrolet Trax No Start, No Sound, No Crank when you turn the key in the ignition: In this case, try turning the steering wheel left and right while gently jiggling the ignition key – this might help to release the steering lock. If the key won’t turn in the ignition, it could be for a couple of reasons: Often this happens when the steering is locked by the ignition lock with the front wheels turned aside or when one of the front wheels is pushed against something. 2014 Chevrolet Trax the key won’t turn in the ignition If the battery is completely dead, jump starting might help. ![]() Check if the battery terminals look tight. If no lights coming on in the dashboard and no other electrical consumers work, the battery could be completely dead or there is no connection between the battery and the vehicle electrical system. No lights on the 2014 Chevrolet Trax dashboard There are a number of issues that can go wrong with starting system and make your 2014 Chevrolet Trax car won’t start or hard time to start – This article guides you through some of the facts behind the starting system, and the components that may be to blame, and tells you what action you can take to try to remedy each situation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |